Generate a Solar Permit Package for a design using Enasolar 2.0kW

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Enasolar 2.0kW inverter. To compare this to other PV inverters, click here.

DC Electrical Properties

  • Maximum Input Current 12A
  • Start Voltage 125V
  • Max DC Input Voltage 600V
  • Peak Power Tracking Voltage 120V - 450V
  • Number of MPPTs 1
  • Polarity of Ground Either
  • DC Disconnect Yes
  • DC Terminal Quantity 2
  • Includes Fuses for String Inputs No
  • Max Rating for String Fuses 0A
  • Rating of Included String Fuses not applicable
  • DC Input Wire Gauge Range 12 AWG – 6 AWG
  • Integrated DC Arc Fault Protection No

AC Electrical Properties

  • Rated Power Output 2000W
  • Compatible Utility Voltages 240V
  • Peak Efficiency 96%
  • Weighted Efficiency 94.5%
  • Maximum Output Current 10A
  • Max OCPD rating data not available
  • AC Disconnect Yes
  • AC Input Wire Gauge Range 12 AWG – 6 AWG
  • Sleep Consumption 1.2W
  • Maximum DC-AC Ratio data not available
  • Standby Consumption data not available

Mechanical Characteristics

  • Height 21.7in (550mm)
  • Width 13in (330mm)
  • Depth 5.7in (145mm)
  • Weight 30.9lb (14kg)
  • NEMA Enclosure Rating NEMA 3R
  • Cooling Method Natural Convection

Environmental Constraints

  • Ambient Temperature Range -22°F - 122°F (-30°C - 50°C)

Warranties and Compliances

  • Compliances data not available
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Enasolar's website.