Generate a Solar Permit Package for a design using APS YC200-EU

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the APS YC200-EU microinverter. To compare this to other PV inverters, click here.

DC Electrical Properties

  • Maximum Input Current 12A
  • Start Voltage 25V
  • Max DC Input Voltage 55V
  • Peak Power Tracking Voltage 22V - 45V
  • Operating Voltage Range 22V - 55V
  • Polarity of Ground Either
  • DC Terminal Quantity 1
  • DC Input Wire Gauge Range data not available
  • Compatible Modules

AC Electrical Properties

  • Rated Power Output 220W
  • Compatible Utility Voltages 240V
  • Peak Efficiency 95%
  • Weighted Efficiency 94%
  • Maximum Output Current 1.2A
  • Max OCPD rating data not available
  • AC Disconnect No
  • AC Input Wire Gauge Range data not available
  • Sleep Consumption data not available
  • Maximum DC-AC Ratio data not available
  • Standby Consumption 0.8W

Mechanical Characteristics

  • Height 8.6in (218mm)
  • Width 5.4in (137mm)
  • Depth 1.4in (35mm)
  • Weight 5.5lb (2.5kg)
  • NEMA Enclosure Rating NEMA 3R
  • Cooling Method Natural Convection

Environmental Constraints

  • Ambient Temperature Range -40°F - 149°F (-40°C - 65°C)

Warranties and Compliances

  • Compliances data not available
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to APS's website.