Generate a Solar Permit Package for a design using Boviet BVM6610P-250 (250W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Boviet BVM6610P-250 (250W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 250W
  • PTC Power Rating 225.6W 1
  • STC Power per unit of area 14.3W/ft2 (153.7W/m2)
  • Peak Efficiency 15.37%
  • Power Tolerances 0%/+2%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 8.28A
  • Vmp 30.2V
  • Isc 8.79A
  • Voc 37.5V
  • NOCT 45°C
  • Temp. Coefficient of Isc 0.05%/K
  • Temp. Coefficient of Power -0.43%/K
  • Temp. Coefficient of Voltage -0.124V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 42.9in (1,090mm)
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 64.6in (1,640mm)
  • Width 39.1in (992mm)
  • Depth 1.6in (40mm)
  • Weight 40.8lb (18.5kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 12yrs
  • UL Fire Classification Type 1
  • Compliances UL 1703, IEC 61215, IEC 61730, CEC
  • CSI Listed Yes

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Boviet's website.