Generate a Solar Permit Package for a design using Conergy PH-250P (250W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Conergy PH-250P (250W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 250W
  • PTC Power Rating 226.3W 1
  • STC Power per unit of area 14.1W/ft2 (152.2W/m2)
  • Peak Efficiency 15.22%
  • Power Tolerances 0%/+3%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 8.27A
  • Vmp 30.3V
  • Isc 8.65A
  • Voc 38.19V
  • NOCT 43°C
  • Temp. Coefficient of Power -0.47%/K
  • Temp. Coefficient of Voltage -0.13V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 65in (1,652mm)
  • Width 39.1in (994mm)
  • Depth 1.8in (45mm)
  • Weight 44.1lb (20kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 5yrs
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Conergy's website.