Generate a Solar Permit Package for a design using DINARG DSP-120P (120W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the DINARG DSP-120P (120W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 120W
  • PTC Power Rating 106.79W 1
  • STC Power per unit of area 11.3W/ft2 (121.8W/m2)
  • Peak Efficiency 12.18%
  • Power Tolerances -3%/+3%
  • Number of Cells 36
  • Nominal Voltage not applicable
  • Imp 6.67A
  • Vmp 18V
  • Isc 6.91A
  • Voc 22.5V
  • NOCT 45°C
  • Temp. Coefficient of Isc 0.05%/K
  • Temp. Coefficient of Power -0.5%/K
  • Temp. Coefficient of Voltage -0.077V/K
  • Series Fuse Rating 9A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 57.9in (1,470mm)
  • Width 26.4in (670mm)
  • Depth 1.4in (35mm)
  • Weight 26.2lb (11.9kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period data not available
  • 90% Power Output Warranty Period data not available
  • Workmanship Warranty Period data not available
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 45°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to DINARG's website.