Generate a Solar Permit Package for a design using Danfoss DA130 (130W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Danfoss DA130 (130W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 130W
  • PTC Power Rating 118.78W 1
  • STC Power per unit of area 7.7W/ft2 (83.1W/m2)
  • Peak Efficiency 9%
  • Power Tolerances 0%/+5%
  • Number of Cells 80
  • Nominal Voltage not applicable
  • Imp 1.03A
  • Vmp 125V
  • Isc 1.26A
  • Voc 152V
  • NOCT 47°C
  • Temp. Coefficient of Power -0.34%/K
  • Temp. Coefficient of Voltage -0.517V/K
  • Series Fuse Rating 5A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Monocrystalline-Amorphous Silicon Hybrid
  • Output Terminal Type Multicontact Connector Type 4
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 55.5in (1,409mm)
  • Width 43.7in (1,110mm)
  • Depth 1.4in (35mm)
  • Weight 44.1lb (20kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 5yrs
  • UL 1703 Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 47°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Danfoss's website.