Generate a Solar Permit Package for a design using ET Solar Group ET-P636125 (125W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the ET Solar Group ET-P636125 (125W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 125W
  • PTC Power Rating 112.21W 1
  • STC Power per unit of area 11.6W/ft2 (124.8W/m2)
  • Peak Efficiency 12.48%
  • Power Tolerances -1%/+3%
  • Number of Cells 36
  • Nominal Voltage not applicable
  • Imp 7.18A
  • Vmp 17.4V
  • Isc 7.8A
  • Voc 21.75V
  • NOCT 45.3°C
  • Temp. Coefficient of Power -0.46%/K
  • Temp. Coefficient of Voltage -0.075V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Tyco SolarLok Connector
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 58.3in (1,482mm)
  • Width 26.6in (676mm)
  • Depth 2in (50mm)
  • Weight 30.4lb (13.8kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period data not available
  • Workmanship Warranty Period 5yrs
  • UL 1703 Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 45.3°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to ET Solar Group's website.