Generate a Solar Permit Package for a design using Fire Energy FE-215P (215W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Fire Energy FE-215P (215W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 215W
  • PTC Power Rating 190.92W 1
  • STC Power per unit of area 12.2W/ft2 (131.4W/m2)
  • Peak Efficiency 13.14%
  • Power Tolerances -3%/+3%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 7.41A
  • Vmp 29V
  • Isc 8.3A
  • Voc 34.8V
  • NOCT 47°C
  • Temp. Coefficient of Power -0.47%/K
  • Temp. Coefficient of Voltage -0.115V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 65in (1,650mm)
  • Width 39.1in (992mm)
  • Depth 1.8in (45mm)
  • Weight 43lb (19.5kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 5yrs
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 47°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Fire Energy's website.