Generate a Solar Permit Package for a design using GE GEPVp-210-M-Clear (210W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the GE GEPVp-210-M-Clear (210W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 210W
  • PTC Power Rating 182.18W 1
  • STC Power per unit of area 13.4W/ft2 (144.2W/m2)
  • Peak Efficiency 14.42%
  • Power Tolerances -3%/+5%
  • Number of Cells 54
  • Nominal Voltage not applicable
  • Imp 7.7A
  • Vmp 27.3V
  • Isc 8.3A
  • Voc 33V
  • NOCT 50°C
  • Temp. Coefficient of Power -0.5%/K
  • Temp. Coefficient of Voltage -0.12V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Tyco SolarLok Connector
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 58.5in (1,485mm)
  • Width 38.6in (981mm)
  • Depth 1.4in (35mm)
  • Weight 39lb (17.7kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 5yrs
  • UL 1703 Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 50°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to GE's website.