Generate a Solar Permit Package for a design using GS-Solar GS-50 (50W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the GS-Solar GS-50 (50W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 50W
  • PTC Power Rating 47.35W 1
  • STC Power per unit of area 5.9W/ft2 (63.2W/m2)
  • Peak Efficiency 6.32%
  • Power Tolerances data not available
  • Number of Cells data not available
  • Nominal Voltage not applicable
  • Imp 1.17A
  • Vmp 43V
  • Isc 1.42A
  • Voc 62V
  • NOCT 45°C
  • Temp. Coefficient of Isc 0.09%/K
  • Temp. Coefficient of Power -0.22%/K
  • Temp. Coefficient of Voltage -0.205V/K
  • Series Fuse Rating 3A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Amorphous Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 29.5in (750mm)
  • Frame Color data not available
  • Backsheet Color data not available
  • Length 49in (1,245mm)
  • Width 25in (635mm)
  • Depth 0.3in (7mm)
  • Weight 31.7lb (14.4kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period data not available
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 45°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to GS-Solar's website.