Generate a Solar Permit Package for a design using Hansol HS-UB-AN1-300 (300W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Hansol HS-UB-AN1-300 (300W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 300W
  • PTC Power Rating 276.67W 1
  • STC Power per unit of area 16.7W/ft2 (179.6W/m2)
  • Peak Efficiency 17.96%
  • Power Tolerances 0%/+2%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 9.24A
  • Vmp 32.5V
  • Isc 9.75A
  • Voc 40.3V
  • NOCT 46°C
  • Temp. Coefficient of Isc 0.05%/K
  • Temp. Coefficient of Power -0.37%/K
  • Temp. Coefficient of Voltage -0.113V/K
  • Series Fuse Rating 20A
  • Maximum System Voltage 1500V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 39,370.1in (1,000,000mm)
  • Frame Color White
  • Backsheet Color White
  • Length 65.7in (1,670mm)
  • Width 39.4in (1,000mm)
  • Depth 1.4in (35mm)
  • Weight 41.7lb (18.9kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 10yrs
  • UL 1703 Fire Classification Type 1
  • Compliances UL 1703, IEC 61215, IEC 61730
  • CSI Listed Yes
  • 1. PTC rating calculated using 46°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Hansol's website.