Generate a Solar Permit Package for a design using Heliene 108HC-395 M10 SL (395W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Heliene 108HC-395 M10 SL (395W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 395W
  • PTC Power Rating 367.64W 1
  • STC Power per unit of area 18.8W/ft2 (201.9W/m2)
  • Peak Efficiency 20.19%
  • Power Tolerances data not available
  • Number of Cells 108
  • Nominal Voltage not applicable
  • Imp 12.56A
  • Vmp 31.49V
  • Isc 13.28A
  • Voc 37.38V
  • NOCT 45°C
  • Temp. Coefficient of Isc 0.03%/K
  • Temp. Coefficient of Power -0.36%/K
  • Temp. Coefficient of Voltage -0.105V/K
  • Series Fuse Rating 30A
  • Maximum System Voltage 1500V

Mechanical Characteristics

  • Type Mono PERC
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 47.2in (1,200mm)
  • Frame Color Black
  • Backsheet Color Black
  • Length 67.9in (1,725mm)
  • Width 44.6in (1,134mm)
  • Depth 1.4in (35mm)
  • Weight 47.4lb (21.5kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period data not available
  • 90% Power Output Warranty Period data not available
  • Workmanship Warranty Period data not available
  • UL Fire Classification Type 1
  • Compliances UL 1703, IEC 61215, IEC 61730
  • CSI Listed No
  • 1. PTC rating calculated using 45°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Heliene's website.