Generate a Solar Permit Package for a design using Itek Energy iT-280-SE (280W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Itek Energy iT-280-SE (280W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 280W
  • PTC Power Rating 257.5W 1
  • STC Power per unit of area 15.5W/ft2 (167.0W/m2)
  • Peak Efficiency 16.7%
  • Power Tolerances -2%/+2%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 8.6A
  • Vmp 32.3V
  • Isc 9.3A
  • Voc 39.2V
  • NOCT 45.01°C
  • Temp. Coefficient of Isc 0.04%/K
  • Temp. Coefficient of Power -0.39%/K
  • Temp. Coefficient of Voltage -0.114V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 35.4in (900mm)
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 65.9in (1,675mm)
  • Width 39.4in (1,001mm)
  • Depth 2in (50mm)
  • Weight 43lb (19.5kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 10yrs
  • 90% Power Output Warranty Period 25yrs
  • Workmanship Warranty Period 10yrs
  • UL 1703 Fire Classification Type 2
  • Compliances UL 1703
  • CSI Listed Yes

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Itek Energy's website.