Generate a Solar Permit Package for a design using Itek Energy iT-360-SE (360W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Itek Energy iT-360-SE (360W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 360W
  • PTC Power Rating 331.8W 1
  • STC Power per unit of area 16.8W/ft2 (180.5W/m2)
  • Peak Efficiency 18.05%
  • Power Tolerances -2%/+2%
  • Number of Cells 72
  • Nominal Voltage not applicable
  • Imp 9.25A
  • Vmp 38.94V
  • Isc 9.62A
  • Voc 47.87V
  • NOCT 45.1°C
  • Temp. Coefficient of Isc 0.04%/K
  • Temp. Coefficient of Power -0.39%/K
  • Temp. Coefficient of Voltage -0.182V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Mono PERC
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 37.4in (949mm)
  • Frame Color Clear
  • Backsheet Color Clear
  • Length 78.5in (1,993mm)
  • Width 39.4in (1,001mm)
  • Depth 1.6in (40mm)
  • Weight 49lb (22.2kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 12yrs
  • UL 1703 Fire Classification Type 1
  • Compliances UL 1703, TUV
  • CSI Listed Yes
  • 1. PTC rating calculated using 45.1°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Itek Energy's website.