Generate a Solar Permit Package for a design using Mage Solar 225/6PH (225W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Mage Solar 225/6PH (225W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 225W
  • PTC Power Rating 201.6W 1
  • STC Power per unit of area 12.9W/ft2 (138.6W/m2)
  • Peak Efficiency 13.86%
  • Power Tolerances 0%/+5%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 7.7A
  • Vmp 29.3V
  • Isc 8.15A
  • Voc 36.35V
  • NOCT 48°C
  • Temp. Coefficient of Power -0.37%/K
  • Temp. Coefficient of Voltage -0.124V/K
  • Series Fuse Rating 12A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Type PV Wire
  • Frame Color data not available
  • Backsheet Color data not available
  • Length 64.4in (1,636mm)
  • Width 39.1in (992mm)
  • Depth 1.8in (45mm)
  • Weight 39.7lb (18kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 30yrs
  • 90% Power Output Warranty Period 12yrs
  • Workmanship Warranty Period 10yrs
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Mage Solar's website.