Generate a Solar Permit Package for a design using Perlight Solar PLM-230P-60 (230W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Perlight Solar PLM-230P-60 (230W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 230W
  • PTC Power Rating 206.4W 1
  • STC Power per unit of area 13.0W/ft2 (140.3W/m2)
  • Peak Efficiency 14.03%
  • Power Tolerances 0%/+5%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 7.66A
  • Vmp 30V
  • Isc 8.18A
  • Voc 37V
  • NOCT 47°C
  • Temp. Coefficient of Power -0.45%/K
  • Temp. Coefficient of Voltage -0.129V/K
  • Series Fuse Rating 13A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 65in (1,651mm)
  • Width 39.1in (993mm)
  • Depth 1.8in (46mm)
  • Weight 46.3lb (21kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 12yrs
  • Workmanship Warranty Period 7yrs
  • UL 1703 Fire Classification data not available
  • Compliances UL 1703
  • CSI Listed Yes

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Perlight Solar's website.