Generate a Solar Permit Package for a design using Pevafersa America IP-VA-180 (180W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Pevafersa America IP-VA-180 (180W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 180W
  • PTC Power Rating 169.56W 1
  • STC Power per unit of area 11.3W/ft2 (122.1W/m2)
  • Peak Efficiency 12.21%
  • Power Tolerances -2%/+3%
  • Number of Cells 72
  • Nominal Voltage not applicable
  • Imp 5.1A
  • Vmp 35.3V
  • Isc 5.4A
  • Voc 43.1V
  • NOCT 47°C
  • Temp. Coefficient of Power -0.24%/K
  • Temp. Coefficient of Voltage -0.144V/K
  • Series Fuse Rating 10A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 64.6in (1,641mm)
  • Width 35.4in (898mm)
  • Depth 1.8in (46mm)
  • Weight 51.8lb (23.5kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period data not available
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 47°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Pevafersa America's website.