Generate a Solar Permit Package for a design using Q-Cells Q.PEAK DUO ML-G11.2 495 (495W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Q-Cells Q.PEAK DUO ML-G11.2 495 (495W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 495W
  • PTC Power Rating data not available
  • STC Power per unit of area 19.7W/ft2 (212.5W/m2)
  • Peak Efficiency 21.25%
  • Power Tolerances -5%/+5%
  • Number of Cells 132
  • Nominal Voltage not applicable
  • Imp 12.95A
  • Vmp 38.24V
  • Isc 13.6A
  • Voc 45.67V
  • NOCT data not available
  • Temp. Coefficient of Isc 0.04%/K
  • Temp. Coefficient of Power -0.34%/K
  • Temp. Coefficient of Voltage -0.123V/K
  • Series Fuse Rating 25A
  • Maximum System Voltage 1500V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Frame Color Clear
  • Backsheet Color Clear
  • Length 80.9in (2,054mm)
  • Width 44.6in (1,134mm)
  • Depth 1.3in (32mm)
  • Weight 57.3lb (26kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period data not available
  • 90% Power Output Warranty Period data not available
  • Workmanship Warranty Period data not available
  • UL Fire Classification Type 1
  • Compliances UL 1703, IEC 61215, IEC 61730
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Q-Cells's website.