Generate a Solar Permit Package for a design using S-Energy SM-230PJ1 (230W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the S-Energy SM-230PJ1 (230W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 230W
  • PTC Power Rating 205.33W 1
  • STC Power per unit of area 13.5W/ft2 (144.9W/m2)
  • Peak Efficiency 14.48%
  • Power Tolerances -3%/+3%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 7.59A
  • Vmp 30.4V
  • Isc 8.18A
  • Voc 37.4V
  • NOCT 47°C
  • Temp. Coefficient of Power -0.46%/K
  • Temp. Coefficient of Voltage -0.129V/K
  • Series Fuse Rating 10A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Tyco SolarLok Connector
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 63.8in (1,620mm)
  • Width 38.6in (980mm)
  • Depth 2in (50mm)
  • Weight 41.9lb (19kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 5yrs
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 47°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to S-Energy's website.