Generate a Solar Permit Package for a design using Sanyo HIT-N235SE10 (235W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Sanyo HIT-N235SE10 (235W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 235W
  • PTC Power Rating 220.36W 1
  • STC Power per unit of area 17.3W/ft2 (186.4W/m2)
  • Peak Efficiency 18.64%
  • Power Tolerances -5%/+10%
  • Number of Cells 72
  • Nominal Voltage not applicable
  • Imp 5.48A
  • Vmp 43V
  • Isc 5.84A
  • Voc 51.8V
  • NOCT 46°C
  • Temp. Coefficient of Power -0.3%/K
  • Temp. Coefficient of Voltage -0.067V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Monocrystalline-Amorphous Silicon Hybrid
  • Output Terminal Type Multicontact Connector Type 3
  • Frame Color Black
  • Backsheet Color data not available
  • Length 62.2in (1,580mm)
  • Width 31.4in (798mm)
  • Depth 1.4in (35mm)
  • Weight 33.1lb (15kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 510yrs
  • UL 1703 Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 46°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Sanyo's website.