Generate a Solar Permit Package for a design using Sanyo HIP-190BA3 (190W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Sanyo HIP-190BA3 (190W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 190W
  • PTC Power Rating 178.69W 1
  • STC Power per unit of area 15.0W/ft2 (161.1W/m2)
  • Peak Efficiency 16.11%
  • Power Tolerances -1%/+1%
  • Number of Cells 96
  • Nominal Voltage not applicable
  • Imp 3.47A
  • Vmp 54.8V
  • Isc 3.75A
  • Voc 67.5V
  • NOCT 44.2°C
  • Temp. Coefficient of Isc 0.02%/K
  • Temp. Coefficient of Power -0.3%/K
  • Temp. Coefficient of Voltage -0.114V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 24.8in (630mm)
  • Frame Color Black
  • Backsheet Color White
  • Length 51.9in (1,319mm)
  • Width 35.2in (894mm)
  • Depth 1.4in (35mm)
  • Weight 30.9lb (14kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 20yrs
  • 90% Power Output Warranty Period data not available
  • Workmanship Warranty Period 2yrs
  • UL Fire Classification data not available
  • Compliances UL 1703
  • CSI Listed No
  • 1. PTC rating calculated using 44.2°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Sanyo's website.