Generate a Solar Permit Package for a design using Sanyo HIP-195DA3 (195W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Sanyo HIP-195DA3 (195W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 195W
  • PTC Power Rating 181.5W 1
  • STC Power per unit of area 14.9W/ft2 (160.7W/m2)
  • Peak Efficiency 16.07%
  • Power Tolerances 0%/+10%
  • Number of Cells data not available
  • Nominal Voltage not applicable
  • Imp 3.5A
  • Vmp 55.8V
  • Isc 3.73A
  • Voc 68.7V
  • NOCT 45°C
  • Temp. Coefficient of Power -0.34%/K
  • Temp. Coefficient of Voltage -0.192V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Monocrystalline-Amorphous Silicon Hybrid
  • Output Terminal Type Multicontact Connector Type 3
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 53.2in (1,351mm)
  • Width 35.4in (898mm)
  • Depth 2.4in (60mm)
  • Weight 50.7lb (23kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 20yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 2yrs
  • UL 1703 Fire Classification data not available
  • Compliances data not available
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Sanyo's website.