Generate a Solar Permit Package for a design using Schüco MPE-380-AL-01 (380W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Schüco MPE-380-AL-01 (380W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 380W
  • PTC Power Rating data not available
  • STC Power per unit of area 6.2W/ft2 (66.4W/m2)
  • Peak Efficiency 6.64%
  • Power Tolerances 0%/+5%
  • Number of Cells 1
  • Nominal Voltage not applicable
  • Imp 2.44A
  • Vmp 155.8V
  • Isc 3.02A
  • Voc 193.8V
  • NOCT data not available
  • Temp. Coefficient of Power -0.21%/K
  • Temp. Coefficient of Voltage -0.581V/K
  • Series Fuse Rating 5A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Amorphous Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Frame Color data not available
  • Backsheet Color data not available
  • Length 102.4in (2,600mm)
  • Width 86.6in (2,200mm)
  • Depth 1.7in (43mm)
  • Weight 229.3lb (104kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 12yrs
  • Workmanship Warranty Period 5yrs
  • UL 1703 Fire Classification data not available
  • Compliances data not available
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Schüco's website.