Generate a Solar Permit Package for a design using Schüco MPE-225-PS08 (225W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Schüco MPE-225-PS08 (225W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 225W
  • PTC Power Rating 202.6W 1
  • STC Power per unit of area 12.5W/ft2 (134.9W/m2)
  • Peak Efficiency 13.49%
  • Power Tolerances 0%/+5%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 7.96A
  • Vmp 28.79V
  • Isc 8.56A
  • Voc 36.76V
  • NOCT 46°C
  • Temp. Coefficient of Power -0.44%/K
  • Temp. Coefficient of Voltage -0.118V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 65.7in (1,668mm)
  • Width 39.4in (1,000mm)
  • Depth 1.6in (40mm)
  • Weight 44.1lb (20kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 12yrs
  • 90% Power Output Warranty Period 25yrs
  • Workmanship Warranty Period 10yrs
  • UL 1703 Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 46°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Schüco's website.