Generate a Solar Permit Package for a design using Schüco MPE 320 MP 02 (320W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Schüco MPE 320 MP 02 (320W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 320W
  • PTC Power Rating 284W 1
  • STC Power per unit of area 11.0W/ft2 (118.8W/m2)
  • Peak Efficiency 11.9%
  • Power Tolerances -3%/+3%
  • Number of Cells 144
  • Nominal Voltage not applicable
  • Imp 4.4A
  • Vmp 72.3V
  • Isc 4.75A
  • Voc 88.1V
  • NOCT 46°C
  • Temp. Coefficient of Power -0.37%/K
  • Temp. Coefficient of Voltage -0.3V/K
  • Series Fuse Rating 10A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Type PV Wire
  • Frame Color Bronze
  • Backsheet Color Clear
  • Length 84.7in (2,152mm)
  • Width 49.3in (1,252mm)
  • Depth 3.7in (93mm)
  • Weight 49lb (22.2kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 12yrs
  • Workmanship Warranty Period 5yrs
  • UL Fire Classification data not available
  • Compliances UL 1703
  • CSI Listed Yes

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Schüco's website.