Generate a Solar Permit Package for a design using Schüco MPE-235-PS09 (235W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Schüco MPE-235-PS09 (235W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 235W
  • PTC Power Rating 213.4W 1
  • STC Power per unit of area 13.3W/ft2 (143.1W/m2)
  • Peak Efficiency 14.31%
  • Power Tolerances 0%/+5%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 7.84A
  • Vmp 29.85V
  • Isc 8.58A
  • Voc 37.11V
  • NOCT 43°C
  • Temp. Coefficient of Power -0.46%/K
  • Temp. Coefficient of Voltage -0.13V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 65in (1,652mm)
  • Width 39.1in (994mm)
  • Depth 1.8in (45mm)
  • Weight 44.1lb (20kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 12yrs
  • Workmanship Warranty Period 5yrs
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Schüco's website.