Generate a Solar Permit Package for a design using Silfab SLUX-250-M (250W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Silfab SLUX-250-M (250W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 250W
  • PTC Power Rating 224.38W 1
  • STC Power per unit of area 11.9W/ft2 (128.2W/m2)
  • Peak Efficiency 12.82%
  • Power Tolerances -2%/+2%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 8.25A
  • Vmp 30.35V
  • Isc 8.6A
  • Voc 37.7V
  • NOCT 45°C
  • Temp. Coefficient of Power -0.47%/K
  • Temp. Coefficient of Voltage -0.123V/K
  • Series Fuse Rating 14A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Tyco SolarLok Connector
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 77.6in (1,970mm)
  • Width 39in (990mm)
  • Depth 1.5in (38mm)
  • Weight 50.7lb (23kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 10yrs
  • UL Fire Classification data not available
  • Compliances data not available
  • CSI Listed No
  • 1. PTC rating calculated using 45°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Silfab's website.