Generate a Solar Permit Package for a design using SunEdison SE-F265KzC-2y (265W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the SunEdison SE-F265KzC-2y (265W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 265W
  • PTC Power Rating 236.6W 1
  • STC Power per unit of area 15.0W/ft2 (161.4W/m2)
  • Peak Efficiency 16.14%
  • Power Tolerances 0%/+2%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 8.42A
  • Vmp 31.5V
  • Isc 9A
  • Voc 38.5V
  • NOCT 48°C
  • Temp. Coefficient of Isc 0.05%/K
  • Temp. Coefficient of Power -0.45%/K
  • Temp. Coefficient of Voltage -0.131V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 39.4in (1,000mm)
  • Frame Color Black
  • Backsheet Color data not available
  • Length 65.3in (1,658mm)
  • Width 39in (990mm)
  • Depth 2in (50mm)
  • Weight 42.5lb (19.3kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period data not available
  • Workmanship Warranty Period 10yrs
  • UL Fire Classification data not available
  • Compliances UL 1703
  • CSI Listed Yes

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to SunEdison's website.