Generate a Solar Permit Package for a design using Suntech STP365S-24/Vfg (365W)
Sign up Learn MoreWith SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.
This page contains information about the Suntech STP365S-24/Vfg (365W) solar panel. To compare this to other PV modules, click here.
DC Electrical Characteristics
- STC Power Rating 365W
- PTC Power Rating 341.69W 1
- STC Power per unit of area 17.3W/ft2 (186.4W/m2)
- Peak Efficiency 18.64%
- Power Tolerances data not available
- Number of Cells 72
- Nominal Voltage not applicable
- Imp 9.56A
- Vmp 38.2V
- Isc 10.14A
- Voc 44.8V
- NOCT 42°C
- Temp. Coefficient of Isc 0.05%/K
- Temp. Coefficient of Power -0.38%/K
- Temp. Coefficient of Voltage -0.135V/K
- Series Fuse Rating 15A
- Maximum System Voltage 1000V
Mechanical Characteristics
- Type Monocrystalline Silicon
- Output Terminal Type Multicontact Connector Type 4
- Output Cable Wire Gauge 12 AWG
- Output Cable Wire Type PV Wire
- Frame Color Clear
- Backsheet Color Clear
- Length 77.7in (1,974mm)
- Width 39.1in (992mm)
- Depth 0.2in (6mm)
- Weight 59.5lb (27kg)
- Installation Method Rack-Mounted
Warranty and Certifications
- 80% Power Output Warranty Period data not available
- 90% Power Output Warranty Period data not available
- Workmanship Warranty Period data not available
- UL Fire Classification data not available
- Compliances UL 1703, IEC 61215, IEC 61730
- CSI Listed No
- 1. PTC rating calculated using 42°C as the NOCT (Nominal Cell Operating Temperature)
This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Suntech's website.