Generate a Solar Permit Package for a design using WEUP Power WP405PM5-60SB (405W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the WEUP Power WP405PM5-60SB (405W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 405W
  • PTC Power Rating data not available
  • STC Power per unit of area 19.2W/ft2 (206.7W/m2)
  • Peak Efficiency 20.67%
  • Power Tolerances -5%/+5%
  • Number of Cells 166
  • Nominal Voltage not applicable
  • Imp 10.47A
  • Vmp 38.7V
  • Isc 11.02A
  • Voc 46.5V
  • NOCT data not available
  • Temp. Coefficient of Isc 0.04%/K
  • Temp. Coefficient of Power -0.34%/K
  • Temp. Coefficient of Voltage -0.127V/K
  • Series Fuse Rating 20A
  • Maximum System Voltage 1500V

Mechanical Characteristics

  • Type Mono PERC
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Frame Color Black
  • Backsheet Color Black
  • Length 67.7in (1,719mm)
  • Width 44.9in (1,140mm)
  • Depth 1.4in (35mm)
  • Weight 48.5lb (22kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period data not available
  • 90% Power Output Warranty Period data not available
  • Workmanship Warranty Period data not available
  • UL Fire Classification data not available
  • Compliances UL 1703, IEC 61215, IEC 61730
  • CSI Listed No

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to WEUP Power's website.