Generate a Solar Permit Package for a design using ecoSolargy ECO285A156P-72 (285W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the ecoSolargy ECO285A156P-72 (285W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 285W
  • PTC Power Rating 257.6W 1
  • STC Power per unit of area 13.6W/ft2 (146.9W/m2)
  • Peak Efficiency 14.69%
  • Power Tolerances 0%/+3%
  • Number of Cells 72
  • Nominal Voltage not applicable
  • Imp 7.89A
  • Vmp 36.1V
  • Isc 8.31A
  • Voc 45.3V
  • NOCT 45°C
  • Temp. Coefficient of Isc 0.06%/K
  • Temp. Coefficient of Power -0.43%/K
  • Temp. Coefficient of Voltage -0.136V/K
  • Series Fuse Rating 15A
  • Maximum System Voltage 600V

Mechanical Characteristics

  • Type Polycrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Frame Color Clear
  • Backsheet Color data not available
  • Length 77in (1,956mm)
  • Width 39.1in (992mm)
  • Depth 2in (50mm)
  • Weight 50.7lb (23kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 10yrs
  • Workmanship Warranty Period 10yrs
  • UL Fire Classification data not available
  • Compliances UL 1703, IEC 61215
  • CSI Listed Yes

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to ecoSolargy's website.