Generate a Solar Permit Package for a design using Q-Cells Q.POWER-G5 265 (265W)

With SolarDesignTool, you can create a design from scratch and generate a full PV permit package in as little as 15 minutes.

This page contains information about the Q-Cells Q.POWER-G5 265 (265W) solar panel. To compare this to other PV modules, click here.

DC Electrical Characteristics

  • STC Power Rating 265W
  • PTC Power Rating 243.14W 1
  • STC Power per unit of area 15.1W/ft2 (162.1W/m2)
  • Peak Efficiency 16.21%
  • Power Tolerances 0%/+5%
  • Number of Cells 60
  • Nominal Voltage not applicable
  • Imp 8.58A
  • Vmp 30.9V
  • Isc 9.2A
  • Voc 38V
  • NOCT 45°C
  • Temp. Coefficient of Isc 0.05%/K
  • Temp. Coefficient of Power -0.4%/K
  • Temp. Coefficient of Voltage -0.118V/K
  • Series Fuse Rating 20A
  • Maximum System Voltage 1000V

Mechanical Characteristics

  • Type Monocrystalline Silicon
  • Output Terminal Type Multicontact Connector Type 4
  • Output Cable Wire Gauge 12 AWG
  • Output Cable Wire Type PV Wire
  • Output Cable Wire Length 39.4in (1,000mm)
  • Frame Color Clear
  • Backsheet Color Clear
  • Length 65in (1,650mm)
  • Width 39in (991mm)
  • Depth 1.4in (35mm)
  • Weight 39.7lb (18kg)
  • Installation Method Rack-Mounted

Warranty and Certifications

  • 80% Power Output Warranty Period 25yrs
  • 90% Power Output Warranty Period 15yrs
  • Workmanship Warranty Period 12yrs
  • UL Fire Classification data not available
  • Compliances UL 1703, IEC 61215, IEC 61730
  • CSI Listed No
  • 1. PTC rating calculated using 45°C as the NOCT (Nominal Cell Operating Temperature)

This web page is not the manufacturer's official data sheet and is not endorsed by the manufacturer in any way. For an official data sheet, please go to Q-Cells's website.